IP address

Do you know what an IP Address is? Well, it addresses the network hardware that will help you connect your PC to other devices on your network and the rest of the world. And the IP address will look like such digits- 506.457.12.512

Every device connected to the internet will have a unique IP address, and hence, there are n numbers of IP addresses available in the world. This will be fulfilled by the new IP version called IPv6.

Now, there are two types of IP versions, one is IPv4, and the other one is IPv6. Talking about the IPv4, the older version has a space of 4 billion IP addresses. And on the other hand, the new IPv6 version can provide more than trillions of IP addresses to all the internet users.

Difference between Public IP and Private IP

A private IP address is an address of your device which is connected to your home or office. Suppose you have four devices to be connected to one internet service provider. All these devices will have a unique private IP address, and these IP addresses can never be accessed from the devices outside your home or the area.

 Example– 192.168.1.1

Private IP addresses are not unique due to the limited number of devices on your network. You can anytime find the personal IP address of your device.

A public IP address is an IP address to which your business network or home is connected. And this IP address will connect you to the world, and hence, it is unique for all users.

What is 192.168.0.1?

 192.168.0.1 is a private IP address that is used mostly by D link routers and Netgear. And if you don’t know, these are the brands of internet routers worldwide. Since this address is granted to these companies, any major router manufacturer can easily choose the same default address if they wish to.  

How to access router login to 192.168.0.1?

Okay, so if your internet router’s default IP address is 192.168.0.1, then by following the steps given here and login into the configuration panel, you will be able to access the router login. Let us understand it with the following steps-

 1. First of all, you need to be sure if the device is connected to the network wirelessly or through an Ethernet cable.

2. Then, open the web browser so that you can use and access the internet.

3. Now, in the address bar, type this-  http://192.168.0.1

Capture1

4. Now enter the default username and the password for the router’s configuration page.

5. After you enter the login details, you will be logged into the configuration page, and then you will be able to make the changes accordingly.

By following the guide given above, you will easily access the router login to 192.168.0.1 without any hassle. If you are experiencing any difficulty, please feel free to contact us by clicking here NSS laptop service center.

Also, for more such blogs and guides, click here

To log in to your router, you need to know its IP address. You can find that using the ipconfig tool in Windows, which we’ll explain below. You can also find the address on your phone by looking at the wifi details, which, again, we’ll show you how to do below.

  • After finding out this information, you will almost certainly need the router’s admin password, and that should be printed on a label on the router itself.
  • If someone has changed the default password, you’ll need to ask them for it or reset the router to factory settings.
  • If you can’t access your router via wifi, connect an Ethernet cable between your router and your PC or laptop.

Find the gateway address in Windows.

First, bring up a command prompt by typing ‘command’ in the Start menu search box and choosing Command Prompt. Or press the Windows key and ‘R’ together and type ‘cmd,’ then press Enter.

Capture2

At the prompt, type ‘ipconfig’ and press Enter. You will see a list of the network adapters on your PC. Look through the information to find the number next to a Default gateway. This is the IP address of your router.

Find the gateway address in Android or iOS.

In iOS, open the Settings app and then:

wifistatus

  • Tap on wifi
  • Make sure your phone is connected to your router’s wifi network.
  • Tap the ‘i’ to the right of the network name
  • Your router’s IP address is shown next to ‘Router.’
  • In Android, settings menus vary from phone to phone, but once you find the wifi settings:
  •  Make sure your phone is connected to your router’s wifi network.
  • Tap on the network name
  • Look for a ‘gateway,’ ‘router,’ or other entry in the list.
  • Unfortunately, some phones do not list the router’s IP address, so you will have to use another device to find it. Again, you can try looking at stickers on the router itself or in its manual for the default address.

 Log in to the router.

Armed with the router’s IP address, open a web browser and type the default gateway number – in our case 192.168.3.1 – into the address bar, then press Enter. Don’t add https:// before the IP address.

Standard router IP addresses are:

  • 192.168.0.1
  • 192.168.1.254 (BT Home Hubs)
  • 192.168.1.1
  • In rare cases, you might need to add a colon and a port number at the end (such as 192.168.0.1:443), but most home routers won’t need this. 

You should now see the login screen for your router. You will probably be asked to enter an admin password to make any changes to the router’s settings. This should be printed on the router, but if you changed it, enter that password instead. If you don’t have the password, you’ll need to factory reset the router by following the manufacturer’s instructions. (We provide generic instructions below.)

 Are you having problems accessing the login screen? Keep reading.

 Troubleshooting tips

  • If you don’t see the login screen, it could be because the gateway IP address has been manually entered under your network adapter settings.
  • To check, open Windows’ Control Panel and search for ‘network.’ Click on View Network Connections under Network and Sharing Center.
  • Right-click on the adapter you use to connect to the internet (typically the wireless one or Ethernet for a PC) and choose Properties.
  • Then scroll down the list to find Internet Protocol Version 4. Click on it and then click the Properties button.
  • Make sure Obtain an IP address automatically is selected, and also Obtain DNS server address automatically.
  • Now repeat the previous steps to see if this has fixed the problem.

Reset your router username and password

If you’ve forgotten your router’s username and password, you’ll need to reset it to factory settings. This is usually achieved by pressing a button or inserting a paper clip or pin into a reset hole.

 Note: Before you do this, bear in mind that you will lose any settings you’ve made and may have to re-enter your broadband username and details if you don’t have a backup. It’s not a significant issue if you have those details to hand, however.

  • Check your manual to find out how long to hold the button to reset it. The router will need to be connected to the mains and turned on for this to work.tempsnip
  • After resetting your router, you can follow the earlier steps to connect to the router’s management interface.
  • If your reason for accessing your router’s settings was to configure a wifi network, you could now do so. It’s worth changing the wifi network name to something memorable, but it’s most important to set a password.
  • If possible, choose WPA2 or WPA3 security rather than WEP.
  • While you’re at it, change the password for the router’s interface to prevent anyone from accessing your router’s settings.
  • Stick a label on the router to forget the IP address, wifi password, router username, and password.

Extra checks

If you still can’t connect to your router, make sure any software firewalls are disabled. These might be part of your antivirus or internet security software or a standalone application such as ZoneAlarm.

  • Temporarily disable these to see if they are causing the problem. Windows’ built-in firewall shouldn’t cause a problem.
  • Check also for other software such as parental control applications, which may prevent you from accessing certain websites – a router’s settings interface is just a website.
  •  There could also be settings within your web browser which are causing a problem, so try a different browser to eliminate this as an 
  • To access a router as an administrator, you must know the router’s IP address and the administrative user’s password and username.

 

How to Access a Router as an Administrator?

 

Follow these steps to connect to your router as admin. These steps work for nearly any router and modem and can be accomplished through any modern web browser on both desktop and mobile devices.

 

  • Verify that your computer is connected to the router using either an Ethernet cable or a wireless connection.
  • If you’re trying to access a router outside of your network, you need to enable what’s usually called Remote Administration. You’ll also need to know the router’s external IP to make this work so that you can enter that address into the browser. However, this type of connection isn’t guaranteed even if the remote admin setting is on since the IP address can easily change (if it’s a dynamic IP, which most home networks are).
  •  Identify the IP address of the router. Most routers are manufactured to use a default address such as 192.168.0.1, 192.168.1.1, 192.168.2.1, or 192.168.1.100.
  •  If those don’t work and you don’t know the router’s default IP address is, or if it was changed, see our How to Find Your Default Gateway IP Address guide.
  • Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox and request a connection to the router using its IP address. For example, type http://192.168.1.1 in the address bar to connect to a router with 192.168.1.1 as its IP address.
  • Enter the administrative login information to authenticate and access the admin settings.
  •  Routers are shipped with default usernames and passwords—usually, the word admin but might be different for your router (some might not even have a password or might not use a username).
  • Some routers are not accessed in the way described above. Most are, but a few, like Google wifi, require different (usually more manageable) steps, such as using a mobile app.

 

What If I Can’t Access My Router?

If, after trying the username and password on the router, the browser returns an error message, your computer might not be connected to the correct router. Or, the username and password combination might not have been right. If you’re sure that you’re using a valid IP address to access the router, try the following procedures:

  • Reboot the router.
  • Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address.
  • Temporarily disable the firewall.
  • Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address.
  • Reset your router to factory defaults.
  • This restores the router to its default condition with the IP address, username, and password that it was shipped with.
  • Open a web browser such as Microsoft Edge, Internet Explorer, Chrome, or Firefox, and request a connection to the router using its IP address.
Sunday 1st November By

1 Comment on this post

    aNatashaBog0191zk
    November 2020 at 11:44 am

    Revolutional update of captchas solving software “XRumer 19.0 + XEvil 5.0”:

    Captchas solution of Google (ReCaptcha-2 and ReCaptcha-3), Facebook, BitFinex, Bing, Hotmail, SolveMedia, Yandex,
    and more than 12000 another types of captchas,
    with highest precision (80..100%) and highest speed (100 img per second).
    You can use XEvil 5.0 with any most popular SEO/SMM programms: iMacros, XRumer, SERP Parser, GSA SER, RankerX, ZennoPoster, Scrapebox, Senuke, FaucetCollector and more than 100 of other programms.

    Interested? There are a lot of introducing videos about XEvil in YouTube.

    Free XEvil Demo available.

    See you later!

Leave your reply

Your email address will not be published.